YouMagine

Information Comments Technical Files

Comments

You need to be signed in before commenting.

Otis Jame

over 1 year

Thanks for the information. It really helped me! [among us](https://amongus2.io/)

Mathew23

almost 2 years

Awesome, it's exactly what I was looking for, <a href="https://fnfonline.co/">fnf </a> thanks <a href="https://dordle.online/">dordle</a>

calinb

about 8 years

Okay, I made the CAD changes but won't have time to print my re-spin for a few days. Here's what it looks like: https://www.youmagine.com/designs/twisterblocks-re-spin

calinb

about 8 years

Wow! Like all your projects, this is simply fantastic design work! However, I'm not too keen on giving up even 4 mm of x and y travel. I use up all my UMO real estate far too often and wish for more already! Do you really need so much 6 mm rod engagement? Thanks for providing a .stp file, because I'm offsetting the faces by 2 mm and the screw holes by 1 mm (to keep them centered on the faces). Hence, I can try your design without giving up any X/Y travel. (Actually, I might be able to gain a little). To anchor the 6 mm rods more securely with my 2 mm shorter twister blocks, I might also try to add an extension on the twister block rod clamp that fits in the twister block rod assembly channel and provide additional support at the very end of the rod. The twister block slots are 2.5 mm deep so I can "get back" all of the 2 mm I'm removing plus 0.5 mm more, assuming that the rods are long enough to bottom in the channel against the twister block! If they are too short to benefit from this idea, I'll just buy longer 6 mm rods and custom cut them to fit tightly. A picture tells 1000 words so I'll post a "re-spin" place keeper to illustrate my idea just as soon as I finish the CAD modifications.

ataraxis

about 9 years

<p>easy to print and a very good design! thank you also for the GT2 update! i would prefer support only on the edges, since the cura support is working better (IMHO).<br>definitely one of your best designs!</p>

universalist1

over 9 years

Was easy to print, and works very well for me. Btw: I recommend to install it together with those easy-to-remove adjustable end caps: http//www.thingiverse.com/thing:99182/

rhymeandreason

over 10 years

This works great! I just 'refurbished' an old ultimaker with them. Printed perfect the first time. Thank you for sharing.