Assembly instructions:

View the link below to download the assembly instructions

https://www.aheadrc.com/manual

 

The flatbed also features many included options to suit your needs and styles.

Headache rack: 

- Full size; 1 piece print (requires a build volume of minimum 275x240x140mm) OR (95x240x80mm) depending on which headache rack you choose.
Split in half; 2 piece print (requires a build volume of minimum 275x120x140mm)OR (95x120x80mm) 
Split in quarter; 4 piece print for “tall” headache rack versions only(requires a build volume of minimum 140x120x140mm)

- Tall headache rack with honeycomb-like panels
- Tall headache rack (alt version) solid filled panels 
Short headache rack for a more sleek look (cannot be used with the included battery box)

Fender:

- Fender; standard wheel arch with inner fender integrated. Designed for 5.4in tyres
- Fender alt ver; wheel arch without inner fender. Designed for 5.4in tyres

Flatbed floor:

- Full size 1 piece print (requires a build volume of minimum 300x240x19mm)
- Split in half; 2 piece print (requires a build volume of minimum 300x120x19mm)
- Split in quarter; 4 piece print (requires a build volume of minimum 160x120x19mm) 

- Flatbed (flat), to mount on chassis that use leaf springs or without shock towers
- Flatbed (cut), to mount on chassis that uses coilover and tall shock towers that protrude through the bed. The shock towers and shocks will show in the clearance hole on the flatbed. 
- Flatbed (cut alt. version), to mount on a chassis that also uses coilovers but lower shorter shock towers such as the Axial SCX10 iii. This one has an integrated enclosure to hide the shocks protruding through the flatbed

Front cover plate:

- Front cover (cut) for drivetrain clearance
- Front cover normal version

Battery Box:

- Lid with contour for a sleeker look
- Flat lid without a contour for easier printing

- Standard compartment (houses 168x52x55mm maximum size)
- Chamfered bottom compartment, same as the standard version but with chamfered bottom sides for a sleeker look to go with the contoured lid (max battery size is the same)

Bumper:

- Bumper post adjustable
- Bumper post fixed length for flush fit with bumper mount

 

A .zip file containing all the print files is also included for convenience.

*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*

Should you need any help, please do not hesitate to contact us!