The Propane tank comes in 4 different versions. Logo and non-logo, as well as 1 piece and 2 piece. It is also part of the “Overland 2” collection. 

The difference between the logo and non-logo versions is that one has the recessed logo, while the other does not have the logo. As for the 1 piece version, the valve and the propane tank are designed as one and cannot be disassembled. This may be a more challenging print on some printers so the 2 piece version should solve this issue. The 2 piece separates the propane tank and the valve. The valve has a stem which fits into the hole at the top of the tank.

It is recommended to print the 2 piece version for a higher success rate, then glue the valve stem into the propane tank to secure it.

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. 

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.