Free
It's free to download
Information
WULBI - Washing Up Liquid Bottle Inverter
By moXDesign
at 2024-05-06
This is an attachment to save you having to wait for a small amount of liquid soap to trickle to the dispensing end of the bottle. Yes, there are other ways to solve this world problem but they don't involve messing around with 3D printers! :)
Unscrew the top, fit the WULBI and screw the top back on. Stand the bottle on the WULBI. Soap can be dispensed immediately!
Technical
Printer: Ender 3
Resolution: 0.20 mm
Speed 50mm/s
Material: PETG
Nozzle Temp: 240°
Bed Temp: 70°
Infill: 10%
Walls: 3
Top Layers: 4
Bottom Layers: 3
Brim: 3mm
Set the print seam to the rear for a smoother print.
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
YouMagine
a MyMiniFactory company
© 2024 YouMagine. All rights reserved. 2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free