1 Frame = 11g Please set your punch to "3x8" or "888"! To get the best results, use the following ### Slicer settings: Print Speed: 50mm/s Layer Height: 0.25mm (very important for correct slicing and stacked production) Top/Bottom Thickness: 0 Infill Density: 0 Wall Thickness: 1.2mm Flow: 105-115% (find the sweet spot where parts are stable, but split apart easily) Support: Off Successful tests in PETG and PLA, where PLA is substantially stiffer, but both will do the job. Splitting stacked parts with a turn of a flat screwdriver should be very easy (tested in PETG and PLA). If not, reduce Flow and/or Print Temperature. Please be careful, don't hurt yourself. If you have a 0.4mm Nozzle, it will print in about 30 minutes. If you have a 0.5mm nozzle, consider tricking your slicer into thinking it would be 0.6mm. It should work just fine.