• All sides are laser cut from clear, 3mm acrylic • Duct mount and magnet mounts are 3D printed in ABS or PLA. • Sides made from 6 lengths of 1m OpenBeam extrusions cut to: 4 x 357mm, 2 cut in half. Assuming 3mm kerf on saw - http://www.makershop.co.nz/openbeam • 2 x Hinges - http://www.hiqcomponents.com/hinge-flat-black-64mm-9.html • 2 x Door handles - http://www.hiqcomponents.com/t-handle-60mm-m6-bush-9.html • 16 x 16mm diam x 2-5mm magnets required. • 1 x 92mm fan - http://www.hiqcomponents.com/fan-230vac-92x25mm-hs-vapo-lead-wire-2.html • 1 x fan guard - http://www.hiqcomponents.com/fan-guard-plastic-92x92mm-2.html • 1 x 100mm flexible duct - from hardware store • 8 x Rubber feet - http://www.hiqcomponents.com/bumper-adh-9-8x4-0mmdome-transparent-1.html • 2 x Cable grommets - http://nz.element14.com/pro-power/1475718/grommet-black-m25/dp/1564549