Print Settings: Printer: Prusa I3 Hephestos 0.4 mm nozzle Sliced with Cura 2.5 Orientation as uploaded Filaments used: Crea PLA professional Crea TPU/FLEX Joystick_Mod_Base_PLA: Layer Height: 0.2 mm Shell Thickness: 1.2 mm Infill: 30% LINES Print speed: 40 mm/s Temperature: 210 °C Supports: NO Print Time: 45 m Joystick_Mod_Top_TPU: Layer Height: 0.2 mm Shell Thickness: 0.8 mm Infill: 20% CUBIC Print speed: 25 mm/s Temperature: 205 °C Supports: YES Print Time: 1:37 h Joystick_Mod_5mm_Adapter_TPU: Layer Height: 0.2 mm Shell Thickness: 0.8 mm Infill: 100% Print speed: 10 mm/s Temperature: 205 °C Supports: NO Print Time: 29 m GLIFO_Mod_Outer_Ring_PLA_V1: Layer Height: 0.2 mm Shell Thickness: 1.2 mm Infill: 100% Print speed: 40 mm/s Temperature: 210 °C Supports: NO Print Time: 58 m GLIFO_Mod_Pen_Holder_PLA_V1: Layer Height: 0.2 mm Shell Thickness: 1.2 mm Infill: 100% Print speed: 40 mm/s Temperature: 210 °C Supports: YES Print Time: 1:50 h GLIFO_Mod_Inner_Ring_TPU_V1: Layer Height: 0.2 mm Shell Thickness: 0.8 mm Infill: 100% Print speed: 25 mm/s Temperature: 210 °C Supports: YES Print Time: 1:21 h GLIFO_Mod_Flower_Handle_V1: Layer Height: 0.2 mm Shell Thickness: 1.2 mm Infill: 20% GRID Print speed: 40 mm/s Temperature: 210 °C Supports: NO Print Time: 27 m NinjaPillow: Layer Height: 0.2 mm Shell Thickness: 0.8 mm Infill: 10% CUBIC Print speed: 25 mm/s Temperature: 205 °C Supports: only for the perimeters Print Time: 11:52 h