The new YouMagine is live - 10% discount at checkout with YOU10 code

You_

a MyMiniFactory company

You_Create

Join ↵

Home / xenomachina / Designs / PlayStation2 Slim Stand

Find same →

PlayStation2 Slim Stand

By xenomachina

Free

It's free to download

Download

Images

Documentation

Comments

You need to be signed in before commenting.

xenomachina

over 9 years

@ChrisRK whoops! Thanks for letting me know. Should be there now.

ChrisRK

over 9 years

There's no download available :(

xenomachina

over 9 years

So far I've only printed this once. I used black 3mm PLA from Monoprice on an Ultimaker2. (unmodified, except with a narrower spool holder to accommodate the Monoprice spool). I had two issues. The first was a slight error in the design, which I has already been corrected in the STL. (the front-to back dimension was slightly too tight, so I has to do a bit of filing) The second issue was that there is some material missing from the bottom, most notably the back edge of the front left foot (you can see this in the photo). I think I didn't lay down enough glue on the bed, and the print lifted in these areas.