YouMagine

Information Comments Technical Files Builds Add build

Comments

You need to be signed in before commenting.

ดูหนังออนไลน์ฟรี

almost 2 years

[url=http://FM2PLAY.com] ดูหนังออนไลน์ฟรี [/url]

Olivier LEFEBVRE

almost 3 years

Réalisation de cette DUCATI avec ma Artillery Sidewinder X2, en essayant d'y mettre quelques petites touches personnelles. 20220303_000540.jpg

Thinkersbluff

almost 3 years

The Ultimaker Blog link is broken (Error 404). If there is any other guidance available re: printing and assembly, it would be helpful to post that here as documentation. There are plenty of live review videos on YouTube, as visual references. There are also videos on YouTube by folks who have printed, painted & assembled this model. Links to some of those may be helpful. e.g.: Live Review: https://www.youtube.com/watch?v=m-ja01btI0E Model Assembly: https://youtu.be/5cz84wMxaLI

mathilda

about 3 years

ducati-1199-superbike waar kan ik de assemblage voorbeeld vinden.

Mamun Karim

over 4 years

total size plz

Andomor

over 4 years

A lot of reverse engineering.. congratulations :)

rowiac

almost 5 years

@T.A. You can use the "I printed this design" button to upload photos and notes. If you want to upload modified parts, you should contact the designer.

Àlex Tutusaus

almost 5 years

Prueba si te deja colgar un enlace a un dropbox o google drive o similar....

T. A.

almost 5 years

Hola, sabeis como puedo subir fotos o como se puede editar este archivo? Tengo información complementaria que sería muy util para los demas

T. A.

almost 5 years

@Rowjac. No son dos neumaticos, son las dos partes de la llanta delantera. Aparte tambien hay que imprimir dos discos y dos frenos. Esta muy bien todo la verdad pero un pequeño tutorial estaria bien. Si puedo cuando la termine lo hago para compartirlo

rowiac

almost 5 years

@T.A. As you probably figured out, you have to mirror one of the right handles to make a left. I don't remember about printing two front tire pieces, but I assume you are correct. These are probably oversights by the designer. All in all though, it's a very good model.

T. A.

almost 5 years

falta la maneta derecha y la llanta delantera hay que especificar que hay que imprimir dos unidades

RAUDSHTEIN ALEX

almost 6 years

did 2 weeks

rowiac

about 6 years

@Giacomo Sagone: Yes, you have to mirror one of the left handles to make a right handle. This must have been an oversight by the designer, but easy to fix. I used Meshmixer to mirror the part, but you might be able to do it in your slicer as well.

Giacomo Sagone

about 6 years

Why I have 2 left handless and I haven't right handless???

gerkon

almost 7 years

@rowiac thanks for the reaction, I'm going to try to fix it. printing is going well. But support remains problem, left with support right without. https://ibb.co/cwVpyb

rowiac

almost 7 years

@gerkon: It looks like the normals are flipped on that part, but it sliced OK for me at 0.15mm layer height in S3D. It does not need support. I tried flipping normals by using the repair tool in S3D, but it didn't work correctly. You could try repairing it in Meshmixer if it still won't slice properly for you.

rowiac

almost 7 years

@waever: The model is approximately 1:6 scale, near as can tell by measuring the wheel diameters.

gerkon

almost 7 years

very nice motorcycle I am working on printing ducati but I found out that main boddy left stl is wrong if I open it in simplify3d. I can print part but is not beautiful and can not apply support. does someone have a solution for me?

waever

almost 7 years

Hi Anyone have any idea what is the scale of the bike model? Thanks

ampirical2016

almost 9 years

I have almost got all the parts printed. Do you have an instruction or illustrations as to how these parts connect. Thanks

Àlex Tutusaus

about 9 years

A new feature "just added" I guess.

pingnagan p

about 9 years

Just press the Download button at the top, you should get a zip file

Àlex Tutusaus

over 9 years

Is there a way to download ALL files at once instead of one by one!??!?!

Àlex Tutusaus

over 9 years

Is there a way to download ALL files at once instead of one by one!??!?!

Valcrow

over 9 years

@kareem no, no supports needed on the engine, print as is with a brim if you're afraid of knocking over. Don't change the angle it's optimized to work the way it is.@inresca I have no clue... I don't see why not if you can print ninja flex normally. Be sure to post a picture if you do! :P

Inresca

over 9 years

If i print the wheels with semiflex ninjaflex will it work?

kareem613

almost 10 years

Going to start with printing the engine. It's upright on an angle. Do I need to print with supports?

SuperSic58

almost 10 years

Thnx @Valcrow, i completed it yesterday, really nice project! Will post some pics later.

Valcrow

almost 10 years

@supersic58 That's correct, the front disk breaks, handles and holders are intended to be mirrored in Cura. All the logically symmetrical pieces should be done this way. Including the front rim. You also need 2 x 1199 shafts. There are no mirrored bits near the middle and back of the bike just the front wheel section.

SuperSic58

almost 10 years

@Valcrow, Super design, started printing this, but i have 2 questions. 1- the front break holders, there is only 1 piece in the file, there should be a mirror version of this? 2- same question for the handels? or am i doing something wrong?

Trispit

over 10 years

@Valcrow First of all I changed my name from Stewe12 to Trispit. I already have a complete the motorcycle, but no photos worth sharing yet. What printed by section are you tallking about? I think I have some good looking prints I could share with settings or hints and tips for newbies :) I am willing to help you with a manual of instructions if you want. Also the stand should be the first part of this model to print! I made it as a last part, because I have troubles printing it with 0.08mm and 0.1mm layer. Big mistake! Much trouble gluing the motorcycle together without standing and ended breaking one small thingie from clutch assembly.

Valcrow

over 10 years

@ frank2908 Thanks, yes I know the exhaust is kinda wrong physically. But you're right, I did it that way so that it would print nicely, and connect nicely so that it 'looks' right. It's a tricky balance. That's one part that I printed extra fine. @stewe12 Looks great! You should definitely post more pictures on the 'printed by' section. It is intended to be printed without much processing & supports. There are still some tolerance issues I know.. I'm in the process of ironing those out so I appreciate the feedback. The forks ARE particularly large. I had to sand them down a bit too so it's not entirely your printers fault. :p Be sure to print a stand first. it doesn't stand by itself and the clutch is rather fragile when it flops over.

Trispit

over 10 years

Hi,thank you for amazing model. I made it without any postprocessing, just as showcase what can be done. Only thing I did was a bit sanding of fork legs to fit, because they melted a little in process of printing - my pbolem, not the model. I printed it in silver for metal parts, red for body shell, tried see through material for window, but it wasn't looking good, so printed that in red also. Fork legs are from mettalic gold material. Overal weight for anybody interested was 280g raw motorcycle + something for supports. Printed hollow for most of the parts, 2 perimeters shell. Rear rim was a bit smaller than tire, but tight enought for superglue gluing :)I have one photo from build, if you are interested, I can deliver more.<a target="_blank" rel="nofollow" href="http://milpal.cz/wp-content/uploads/2014/09/3Dbike.jpg">http://milpal.cz/wp-content/uploads/2014/09/3Dbike.jpg</a>

Dreamworker

over 10 years

Superb design!

frank2908

over 10 years

Hi, love your work, printing them now, just a small observation. The exhaust is wrong, i think. One of the exhaust is coming out of the engine then going back. The right way is the 2 exhaust should join the muffler at the bottom of the bike. Unless you design this on purpose to make it easier to print

Chipsy

over 10 years

Did you calculate fillament needed for the total print, or the weight of the printed bike?

Valcrow

over 10 years

Yes, you will need to print with standard supports for the left/right clutch. I just used standard Cura generated supports. Be sure to print the stand and stick those clutches on last since if it falls over, it's going to fall directly on the clutch.

XYZWorkshop

over 10 years

guess this will be covered in the "upcoming print and assembly guide" but what would you recommend to print the left and right clutch? You need supports for these don't you?

XYZWorkshop

over 10 years

Simply simply amazing! Thank you for sharing your hard work! Quality models as usual! Gonna try an print this!

Fabsterdam

over 10 years

We're definitely going to try! And I think the body would look great in acetone-vapor-smoothed ABS.

Valcrow

over 10 years

Thank you, It is printed it all in PLA silver on a UMO. I didn't have any transparent materials on hand so I didn't try to print the windshield in transparent. The tires are painted black primer which gives it a very matte/rubber look. Other parts of the bike have a glossier varnish to differentiate the reflective properties from the rubber like tires. If you print in PET or Ninja, let us know how it goes!

Fabsterdam

over 10 years

Wow, very very impressive, both the model and the print! What materials did you use, all PLA? Did you try using something transparent like PET for the wind screen? Flexible (rubber) filament for the tires?

Ducati 1199 Superbike (Complex)

By Valcrow

Comments

License

Tags

Valcrow

YouMagine

Ducati 1199 Superbike (Complex)

By Valcrow

Add To Collection

Comments

License

Tags

Valcrow

YouMagine