Axial Adventure |
Other |
Traxxas |
Military |
Trail Truck / Crawler |
Full bodies |
1:10 |
Find same →
90% goes to the Creator
(excluding payment processing fees)
$7.50
Technical
Assembly instructions:
Can be found here
Designed to be printer friendly, the parts come in a variety of included options.
Cab:
- Cab full (requires a printer that can print a minimum of 385x175x165mm.
- Cab split version (comes in 3 parts. The cab, roof, and flanks. Requires a printer that can print a minimum of 125x175x150mm.)
- Cab side panels (comes in 2 varieties. The vented version can be fitted onto both sides of the cab. A special version for the right side is also included specifically for use with the air filter.)
Bonnet:
- Bonnet bump (bump version has the engine clearance bump and is more accurate to real life)
- Bonnet smooth (doesn’t have the bonnet bump)
Fender:
- LED version (has cable routing for 3mm LED light for fender indicator light)
- Standard version (Does not have routing, does not have hole to fit 3mm LED light for indicator light. Still allows the cab light bucket to be fitted)
Bumper:
- Blank number plate (hides the 2x bumper mount screws and gives a clean look)
- Logo number plate (ahead RC’s logo on the front. Hides bumper mount screws)
- Custom number plate
- Bumper mount (there are 6 different bumper mounts included)
-
Accessories: - Cab side handles (3 types of handles available to mount to the side of the cab)
- Air filter (Can be fitted with the included “mushroom” air filter part)
- Horn (3 styles of horn to choose from)
Some files will need to be printed twice, this includes the following:
Bonnet Latch
Fender light bucket
Fender headlight lens
Fender blinker light bucket
Fender blinker lens
Fender light
Door handle (print a total of 2)
Cab light (print a total of 3)
Accessories cab handle (whichever version you chose, double it)
Bumper hook
Cab hinge
A .zip file containing all the print files is also included for convenience. DXF files for the door and rear windows are also included.
(The wheel hub caps are not included)
We did a Dual Cab version of the build using a custom stretched Axial SCX10 iii chassis. Learn more about this awesome build here! Or check out the Dual Cab here!
*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*
Should you need any help, please do not hesitate to contact us!
.jpg)
.jpg)
88 objects
13 Followers
Joined 9 months ago
Hong Kong
Based in Hong Kong, we design scale accessories and body shells for RC crawlers. Enhance the looks of your beloved RC rig with our wide range of accessories!
Free