1/10 Crawler FC body

By Ahead_RC

1303
0
KIT
90% goes to the Creator (excluding payment processing fees)
$15.00 $10.00
Main Image
Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image

Technical

Assembly instructions:


Cab:

  • For the separated roof and cab version, simply sand flat the points that join the roof to the cab. Line up the points and use superglue to bond the roof to the cab
  • Wiper grille fits loosely in the slot, it is recommended to superglue the wiper grille to the slot in the cab. Wipers can be press fitted into the holes in the wiper grille, and does not need superglue.
     
  • Front grille can be mounted with the use of 4x M3*10mm countersunk screws. Grille lenses can be just super glued in place.
     
  • Fenders are mounted to the body with a total of 10x M2*10mm socket head screws
     

Door:

  • Mounts onto the cab with a hinge or super glued shut
     
  • Mirror assembly; Put the mirror’s stub in the mirror mount hole, it should be a light press fit so take note of which side of the mount is correct. Use a M2*5mm socket head screw to secure the mirror from the bottom of the mount. (DO NOT OVERTIGHTEN) 
     
  • Wing mirror assembly can be mounted on with a M3* 10mm countersunk screw on each door
     
  • Door handles can be mounted on with 2x M2*5mm socket head screws on each door. The door has indented grooves to help assist with mounting the door handles.
     
 

Bed:

  • The front half or full bed can be mounted to the body using 5x M3*15mm countersunk screws and 5x nylon locknuts.
     
  • If a half bed is printed, it is recommended to superglue the two halves together.
     
  • Fender can be mounted on with either 2 or 3x M2*10mm socket head screws on each side, depending on the version printed.
  • Tail lamps are a press fit into the slot in the rear of the bed. Use super glue to mount if tail lamps feel loose. Lenses can also be super glued onto the tail lamps.
     
  • Rear door handle is secured with either 1x or 2x M2*10mm socket head screw, depending on the version printed.
     
  • Rear mock hinges can be super glued on into their slots.
 

For your convenience a .zip file containing all the files has been uploaded along side all the indivudal files.

 

Should you need any help, please do not hesitate to contact us!
88 objects 13 Followers
Joined 9 months ago Hong Kong

Based in Hong Kong, we design scale accessories and body shells for RC crawlers. Enhance the looks of your beloved RC rig with our wide range of accessories!

YouMagine

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom