Custom lasercut and bent part, made from 3 mm corten steel. Shipping via forwarding agent. Stainless steel 6x50 mm screws & 8x40 mm dowels for "feet" and mounting to the wall (5 pcs. each). I drilled out the laser-cut holes for that. Some 4 or 4.5 mm screw and a 6 mm dowel for the top mount - you need the ratchet with flexible shaft here. Two DIN 603 M5x20 mm mushroom head / carriage bolts ("lock screws" with a 7x7 mm square beneath the head) with shims and acorn nuts for the printed cable holder.