YouMagine

Comments

You need to be signed in before commenting.

Tod Patterson

about 4 years

Hi Jotham, I'm designing a ROV and I'm looking at water jet thrusters. Yours is just right size. Is there any way to get your CAD files for just the thruster parts. Here's my email. todtheexplorer@gmail.com thanks Tod

Jotham B

almost 5 years

So what you can do is hook up the motor cooling and the ESC cooling to the same water loop - works just fine. It does have enough pressure to push it through. I don't need a very high flow rate I found since it doesn't heat much to begin with. Do post some pictures if you get it going! Would love to add them here with your permission.

weaver

almost 5 years

Ok thanks, I see a few issues with that so might just do it in the 3 sections. One more thing, I see 2 spots in the back to hook up the water cooling but it looks like you need 2 inlet and 2 outlet lines. Where are the other 2?

Jotham B

almost 5 years

@kyle Wenner you'll want to print it with the rear of the boat facing downward so that the nose points up as it prints. I highly recommend you print it in sections and glue it together but as one piece should work too. Let me know how you get on.

weaver

almost 5 years

I,m about to print this version 3 with your new hull. I want to print it complete without splitting it, what do you think is the best orientation? model looks awesome by the way.