Home /   gcalin /   Designs /   Ultra Dry Spool Holders
Find same →

Ultra Dry Spool Holders

By gcalin

32
0
25
Free
It's free to download
  Download
Main Image
Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image Preview Image

Comments

You need to be signed in before commenting.
R32cool
R32cool
over 7 years
Hey Rebekah I'm at a loss at the moment all the filament's i have are all specialised. nylons, Cpe's, Abs, etc. so now looking for some Pla..but luckily I have all the hardware here so that helps.
rebekah3505
rebekah3505
over 7 years
hiya anthony, I used about 500gr for the main body and not a huge amount for the parts. I have got bearings in one but not essential. I made some solid rings in the same size and they work fine. all the hardware from the parts list, I bought off ebay and was cheap enough.
R32cool
R32cool
over 7 years
Hi Rebekah & Gabriel Thanks for your help'. I've not started printing them yet as I need to find myself a suitable cost effective filament to use. but soon as I've printed one I'll get back with a heads up.. thanks again for the help.
rebekah3505
rebekah3505
over 7 years
Hiya Anthony, I've printed two so far and can safely say no support is required. Just make sure the bottom pieces are printed with the bottom on the build plate and the tops are printed with the roof on the build plate. I have found that you may need to re-orientate some for some reason. I trust they were saved in the correct way but for some reason some are on their side.
gcalin
gcalin
over 7 years
Hi Anthony, All parts were designed to be printed without supports. Just keep them oriented as displayed in the assembly instructions (all STL were exported with the proper orientation).
R32cool
R32cool
over 7 years
Hi there I just download these. which way up would you recommend printing to avoid/ minimilise the use of support ?
gcalin
gcalin
over 7 years
Hello rebekah3505, Hope it works well. Publish some pictures when it is done! You should be able to print all parts without support.
rebekah3505
rebekah3505
over 7 years
so far so good. I am printing it at this moment and looks great. I used minimal support but I don't think that will be necessary. looks very sturdy. I will be printing a few of these. I did add some text on the front so I can identify what material is inside. I look forward to the finished result. Bex

License

Tags

spool holder
gcalin
3 objects 12 Followers
Joined over 7 years ago

YouMagine

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free About Open A Store Creators HUB Contacts
Privacy Policy Premium License Terms and Conditions