YouMagine

Information Comments Technical Files

Comments

You need to be signed in before commenting.

dandy-lion

about 8 years

Much obliged. I just wanted to check my hole geometry is correct for the dual extruder. i.e. for shrinkage

fns720

about 8 years

Just ask - uploaded :)

dandy-lion

about 8 years

anyone got the step file?

dandy-lion

about 8 years

Cheers!

PyroNyzen

about 8 years

Quaylie, Despite the modelling problem, i've had much success using this when printed with Colorfabb XT filament (245˚C temp)

dandy-lion

about 8 years

Has anyone had any success with this component yet?

PyroNyzen

almost 9 years

This model is designed wrong, the two bowden holes need to be on a side with a low bearing hole. just take one of the current bowden holes and move it to the opposite corner (this makes it possible to have both nozzles on the right side of the printer and the fan on the left side, as it should be) currently, this will put 2 nozzles on the front or back of the printer, leaving no place for the cooling fan.

fns720

about 10 years

No, I did not use it, I designed this by request.

nickthetait

about 10 years

Have you used this design for long? How has it worked out? I'm just about to upgrade to dualstrusion.