YouMagine

Information Comments Technical Files Builds Add build

Comments

You need to be signed in before commenting.

avo1952

over 2 years

I had printed the model, as soon I have some pictures I will post. I think the model is prepared to use a roof but it is mising. Is it possible to get the stl's for it?

Paul Larkin

almost 7 years

well for anyone that cant print boiler bands use the front wheel rim file reduce it in cura to 62.5% and stop the print at 80 % complete

pimar3D

almost 7 years

Hi, ok but I can't understand why you have this problem while the boiler band .stl file looks fine.

Paul Larkin

almost 7 years

I got round it I used wheel rim file resized it and stopped the print at 80% so it looks about right

pimar3D

almost 7 years

Hi Paul, I have had any problem with the print of the boiler bands. Here is the file I used. I hope it works fine for you.

Paul Larkin

almost 7 years

hi I have printed every thing just fine, except the boiler bands they only print as a circle of dots. I have tried using the file here and the zip file but getting the same thing, can you please check your copy of the file to see if it works, and maybe email me that file, as with out that rings that im printing in gold will let the model down thanks paul paul.288@hotmail.com

Paul Larkin

almost 7 years

thx for answering im in Ireland and I will sure post a pic when its finished but wait for the screws from china

pimar3D

almost 7 years

Hi Paul, Ron was lucky to find his driver on eBay. After many time searching I get a "play mobil" driver. Here in France we have many play mobil collectors so it's easy to find. I don't know about your country. I'll be pleased to see your work when finished.

Paul Larkin

almost 7 years

im making the engine at the moment BUT I will have no one to drive it as there is not a print for driver fred ..... where did he come from as he looks to scale

cabbageheart

over 8 years

Hi pimar3D Sorry for the delay in responding but I have been very busy designing new stuff. Try these screws from eBay UK or maybe there's an equivalent on eBay fr. http://www.ebay.co.uk/itm/301911106089?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT http://www.ebay.co.uk/itm/361537463285?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT You can probably get away with 0.5mm sorter but not 0.5mm longer screws.

pimar3D

over 8 years

Hi Ron, I love this design and I hope make one very soon. But ther is a little problem: here in France, I can't find M2 x 9.5mm or 6.5mm Self Tapping Screws. We can buy only M2 x 6 or 10mm. My friend Google don't say better. Please let me know if ther is a place to buy the screws you use or if the +/- .5mm is not a problem. Many thanks for your reply.

Traction Engine

By cabbageheart

Comments

License

Related objects

Traction Engine

cabbageheart

YouMagine

Traction Engine

By cabbageheart

Add To Collection

Comments

License

Related objects

Traction Engine

cabbageheart

YouMagine