This organizer holds your test cables and clips used with multimeters, power supplies and other measurement devices (4mm banana plug).Top row holds 12 test probes or fine tweezer clips (see images) - 4.5mm diameterSecond row holds 6 aligator clips - 13x9 mmThird row has 3 bars for cablesSize: 150x67x42 mm (print with original scale!)IMPORTANT: This organizer is made specifically for "Hirschmann" equipment (see picture). If you use different brands, check that your stuff will fit before printing this large thing!Sketchup 8 source files are included so you can adapt for your own equipment.PM me if you need me to make adjustments for other (maybe more common) brands.Mounting:Can be wall-mounted with two M4 screws (sliding receptables on the bottom). You can also use double sided tape.Printing instructions (Cura 13.10):- 0.06 mm layer height (0.1 works perfectly, 0.06 gives better optical quality)- 0.8mm shell thickness (1.2 for even more strength, but takes LONG to print)- 1mm top/bottom- 24% infill- support type: none (no overhangs / bridging)- platform adhesion type: noneTip: Use a material that produces as little stringing as possible and has good layer adhesion (the bars holding the cables rely on that). I printed it with "Raven Super Premium PLA by ProtoParadigm".