The key is not just to re-orient this piece, add some custom generated support, and be done with it -- these pieces are to compare support generation settings in the various tools (including manual support generation) to see what can be learned about how support behaves differently from material to material. TESTING LOG: ## ABS SERIES ## 2016-07-22-0800_SupTest01-13085.gcode - - Cura 2.1.2 - Baseline - Default UM2+ ABS "Fine" settings for Nozzle 0.25mm ## CPE SERIES ## 2016-07-22-0845_SupTest01-13085.gcode - - Cura 2.1.2 - Baseline - Default UM2+ CPE "Fine" settings for Nozzle 0.25mm