Stemfie Sailcar

By Cantareus

9
9
Free
It's free to download

Information

Stemfie Sailcar

Use this model as a fun project for kids or as part of a STEM activity. Have students design their own sails and try different mast positions to experiment with performance and stability. Check the second photo for parts. Axles are 2mm metal rods, 50mm long for rear axle and 14mm long for front axle. There's a jig for pressing the wheels onto the axles, it works but it's not great. Try if you want to otherwise you can also use a vice, g-clamp or hammer. This is my first time using Stemfie. A free 3D-printable construction set by Paulo Kiefe. The blue parts from the second photo show the standard Stemfie parts, they're included in the build plate STL. Check stemfie.org, you may want to substitute parts or print additional parts to make a different built. 12BU threaded beam 6BU threaded beam 0.25BU screw x 4 1BU screw x 4 0.5BU nut x 3 https://www.youtube.com/watch?v=4irC_Ipcg_Q
6 objects 64 Followers 398 Downloads
Joined over 2 years ago
Enjoy a 10% sitewide
Discount at checkout
Get a 10% Discount