Free
It's free to download
Videos
Images
Documentation
Technical
- Printing with PETG with support.
- Printing settings:
-- Bed Temp 80 c Nozzle temp 235 c Layer height 1.5mm Infill 50%
- Threaded insert process:
-- Tools: Pliers, Heat Gun, Screw driver with flat handle.
-- Hold the threaded insert and heat it using the heat gun, you can heat it for 30 sec to 60 sec.
-- Press the threaded insert into the center hole, make sure that the plier doesn't touch the plastic.
-- Use the screw driver to press the threaded insert making sure it is fully in the hole and straight.
Free