YouMagine

a MyMiniFactory company

Create

Join ↵

Home / royrobotiks / Designs / Soap Bubble Machine

Find same →

Soap Bubble Machine

By royrobotiks

Free

It's free to download

Download

❯ VIDEOS 0

❯ IMAGES 5

❯ DOCS 0

Comments

You need to be signed in before commenting.

royrobotiks

over 6 years

I have a box with all kinds of motors and just took one out that was right for the purpose. I think I salvaged it from the lens system of an old video projector. So unfortunately I cannot help you with a good source. But you could also adapt the model to a motor that you have. However, if your motor is smaller, you could also print an adapter that makes the motor fit into the bubble machine.

jgbrown

over 6 years

Yep, confirmed they are all M3. Very nice fit. Likely a little inaccuracy in my printer made me question it. :-) Would you happen to have a recommendation for the motor? There are all sorts of 12v, low RPM motors on eBay but must of them are a lot smaller than your suggested dimensions. Thanks -- Jeff

royrobotiks

over 6 years

It's actually all M3 screws. If the holes are too small, you can use a 3mm drill to open them up a bit.

jgbrown

over 6 years

What size hardware is used to connect everything? M3 seems to be too big. I don't have anything smaller so will need to order. Perhaps M2.5?