Print Settings: As we only have Ultimaker 2+ 3d printers with bowden systems printing flexible materials can be difficult, Therefore we used Ultimaker brand TPU and curas slicer settings for this material. However if you have a direct drive system [Prussa + many others] you may be able to push our conservative settings more. Resolution: 0.1 Infill: 100% Brim: Yes (At least 8mm) Raft: No Speed: 40mm/s Post processing: Remove brim Dimensions: 59mm x 94mm x 11mm Time to Print: 5 hours - 25 minutes Material Usage: 16g Notes: Printing flexible filament involves more trial and error that conventional printing be prepared to dial in settings!