Free
It's free to download
Information
Simple and demountable dice tower
By Egrojyos
at 2024-05-04
This a dice tower that you can disassemble to store into the game box.
The design is based on the printer settings too. You must print with my settings to get the hex grid that encourages the dive movement.https://youtu.be/JMHKoiYf8Io
Technical
If you want to get the hex grid you must slice it on slic3r with this settings:
layer height: 0.2mm
Solid layers: top: 0 bottom: 1 (or 2)
Infill:
Fill density: 0.3
Fill pattern: honeycomb
Fill angle: 45º
If you slice it on Cura you'll get an square grid:
Bottom/Top thickness (mm): 0.2 (or 0.4)
Fill density (%): 30
...Infill:
Disable "Solid infill top"
Enable "Solid infill bottom"
Infill overlap (%) 15
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
YouMagine
a MyMiniFactory company
© 2024 YouMagine. All rights reserved. 2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free