Free
It's free to download
Information
RK95 & 62 Flashlight Mount (30mm)
By Kart5a
at 2024-05-10
Attach the piece of rubber silicone between the barrel and 3D-model to isolate the heat.
The screws and nuts will tight up everything in place.
Technical
You will need:
3D printed mount
1mm x 35mm x 15mm piece of rubber silicone
2 x M4 Hex Screws (Length ~20mm and ~12mm)
2 x M4 Hex Nuts
Attach the piece of rubber silicone between the barrel and 3D-model to isolate the heat.
The screws and nuts will tight up everything in place.
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
Related objects
8 objects
35 Followers
Joined over 10 years ago
Tampere, Finland
I am 18-year-old guy and my hobby is to design 3D models and print them with my Ultimaker 2 3D printer!Check out my videos on YouTube (in Finnish):
YouMagine
a MyMiniFactory company
© 2024 YouMagine. All rights reserved. 2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free