Rigidbot Side Spool Rig w/Filament Runout Switch
By coconnor55
Free
It's free to download
Videos
Images
Documentation
Technical
[Updated 5/7/16] There are 4 printed parts in all, Side Spool A and B (or Side Spool All), Side Guide Switch Bolton, and the tension nut. Print in ABS or PLA, 25-35% infill, 5 @ M3 x 10-15mm machine screws, 6" section of 3/4" Sch 40 PVC pipe, and a tie wrap. You may need to ream out the guide hole with a 5/64" or 3/32" drill bit to clean it up after printing.
The limit switch arm needs to be rotated in Y by 270 degrees to lay flat on the bed (see CAD rendering).
16 objects
9 Followers
9904 Downloads
Joined almost 11 years ago
coconnor55@gmail.com
Has fun designing, printing, tinkering with 3D printed cameras (creator of Flyer 6x6, Clipper 6x18, funded by "Pinhole Printed" Kickstarter) and open source 35mm film to 120 spool adapter. @pinholeprinted
Free