Work in progress: Collection of remixes of the E3D v6 mount designed by MyMakibox for the makibox 3D printer.Files are pretty much done but haven't been organised and properly labeled.The ones labeled 4.3 were the first ones I tried that did a pretty good job but still a bit too much play. Modified from https://www.youmagine.com/designs/mymaki-hotend-mount-for-e3d-v6-on-makibox as the parametric one was not available yet.The ".scad" files are the ones I used to tweak and fine tune the setting to print on my prusa i3. Ori should be as it is available from http://www.thingiverse.com/thing:449018 but I found lots of problems with the measurements use which lead me to change alot of it in the other ".scad" file. From memory hole distance was changed so that it would slice in a way that would allow it to print with proper 2 layer perimeters and not have odd gaps here and there. I did change the total thickness settings so that I could use it with a J-head but if you change that back to the default for E3D it should work fine. Split size had to be reduced or it would actually take way too much out of the mount and cause the channels to be too shallow. This may have been fixed in the latest version in thingiverse. I have included the ".stl" for the variations I printed for the J-head but I don't remember what exactly I tweaked in each. v2.2 works from memory.The z-extenders I used have also been uploaded and were originally designed by someone going by the name "makibox" or something very similar on the makibox users google plus community but was never uploaded anywhere besides a dropbox like link. The blend file has modified the original so you can tweak the height to exact lengths easily and added a notch to allow it to fit properly as a bit of the original piece's plastics interferes there.