You'll need - 2x Arm detail piece V1 - 1x Body bottom V1 - 1x Body V1 (rotate 45 degrees, see comment below) - 1x Left arm bottom V1 - 1x Left arm main V1 - 1x Left foot V1 - 1x Middle Foot V1 - 1x Right arm bottom V1 - 1x Right arm main V1 - 1x Right foot V1 Revision 1: Dome I noticed there are a few overhangs on the Dome V1 part. Overhangs are something I really tried to avoid to make printing easier. I decided to offer a new version of the dome. You have two options now: Option 1) please take notice of the overhangs! - 1x Dome V1 Option 2) - 1x Dome V2 - 1x Dome front lens V1 - 3x Lens dome V1 You can also mirror the left and right parts if you like. *) In order to make the "Body V1" part fit the platform at 100% you'll need to rotate it 45 degrees so that R2's 'shoulders' are positioned diagonally from the top view.