Protective Visor by 3DVerkstan
By erikcederb
Free
It's free to download
Videos
Images
Documentation
Information
Protective Visor by 3DVerkstan
By erikcederb
For complete information, please check out the main site at http://Faceshield.nu
The plastic shield can be made out of any semi-stiff plastic sheet between 0.1 and 1mm, including overhead film, cover sheets for binding machines etc, as long as it is available in a suitable format.
There currently are 5 different versions. One for SWEDEN, two are for EUROPE, two for NORTH AMERICA and one compatible with the Prusa style laser cut shields.
Read more about the different versions:
https://3dverkstan.se/protective-visor/protective-visor-versions/
Please read the print guide for recommended settings
https://3dverkstan.se/protective-visor/protective-visor-print-guide/
If you need it to sit tighter on your head or if you are leaning over patients a lot and worry about it falling off, a simple rubber band or elastic hair band can be put over the two hooks in the back.
You need approx a 210x210mm build area to print two at a time, and about 160x190mm if you are OK with only doing one at a time.
Free