just wanted to say thanks, have used several of the parts to replace broken ones. Mostly the belt holders :)
nkvoll
about 10 years
<p>I just drilled a small hole for it instead of printing it anew :) All other parts fit together quite nicely (I haven't printed the extruder + z probe mounts though, as I don't have the printrbot extruder) :)</p>
Ed_B
about 10 years
<p>@nkvoll Thanks For the report! It's not missing anymore. :-) I updated 1116.stl and all_parts.stl . Hopefully you can put a little drill hole for that ziptie hole and not have to print the entire part again?(If you already printed it) If you find anything else, let me know and I will fix it ASAP!</p>
nkvoll
about 10 years
<p>Part 1116 is missing a hole for the zip-ties (2nd row, 2nd zip hole missing). :)</p>
nkvoll
over 10 years
Ed_B: I'll definitely take some pictures when i'm done. It's going to take a little while though, since the printer is used for other parts as well, so I can't just keep on printing. Also, I probably have to wait a month to get the parts I need to put it together as well. :)
I'm having to customize a few parts though, as I can only print around 195mmx195mm, which means I have to cut up the larger parts and put them together after printing.
Ed_B
over 10 years
@nkvoll I would absolutely love to see it when you are done. I have only been using individual parts to modify and upgrade.
I also just posted the XL tower upgrade and I do plan to convert other Printrbot Files for printing.
nkvoll
over 10 years
<p>@Ed_B: no problem :) I'm currently printing all these parts, so it was kind of obvious with the part in hand that it didn't quite fit.</p>
Ed_B
over 10 years
@nkvoll Thank You so much for bringing the missing square hole in my pattern to my attention. Part 1107 and all-parts stl files have been corrected.
nkvoll
over 10 years
Your 1107 is missing a square hole in the top right :)