Free
It's free to download
Information
Printrbot Simple Maker Edition 1401
By printrbot
at 2024-05-03
This is the file needed to laser cut a previous iteration of the Printrbot Simple Maker Edition in plywood. We use Russian Birch Plywood, 6mm thick.
For all non wood components, visit http://printrbot.com/store/.
Technical
Hardware
1 - 1 1/2" 6-32 Screw
1 - 3” 6-32 Screw
2 - 6-32 Hex Nut (Locking)
1 - #6 Washer
6 - M2 10mm Screw
22 - M3 10mm Screw
34 - M3 16mm Screw
4 - M3 20mm Screw
1 - M3 22mm Screw
36 - M3 Hex Nut
4 - M3 Hex Nut Locking
1 - M5 16mm Bolt
1 - 3/4” Spring
1 - Delrin Acme Nut
1 - Extruder Gear w/Set Screw
1 - 11/16” Nylon Spacer
1 - 1/2” #2 Nylon Spacer
1 - Clear Short Vinyl Tube
2 - Rubber Tubing
4 - Bed Spring
2 - Sandpaper Dremel Pulley
4 - Nylon Washers
Rods
2 - 10" Smooth Rod
4 - 6 1/2" Smooth Rod
1 - 7 1/8” Acme Rod
Motors
1 - Small Motor (Y-axis)
3 - Large motor
1 - Electronics Board
Wiring Bag
1 - Hotend Power Cable
1 - Hotend Thermistor Cable
1 - Red/Black Power Adapter
1 - Ubis Hot End (1.75mm, 0.4mm tip)
3 - End Stop
1 - Fan Extension Cable
1 - 6” Wire Wrap
1 - Fan
1 - Fan Shroud
1 - 3’ Fishing Line
1 - Micro USB Cable
43 - Zip Tie
Bearings/Zip Ties
1 - 625ZZ Bearing
12 - 8mm Linear Bearing
Laptop-Style Power Supply
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
YouMagine
a MyMiniFactory company
© 2024 YouMagine. All rights reserved. 2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free