Designed to clamp to the front right corner of the Printrbot Simple with a self- threading hole. Primarily made for a camera mount, however, may need an additional part to adjust camera angle. Add-on designs coming soon.NOTE: this is a press-fit design. May need to provide some extra force when mounting to the printer for the first time. This model was printed with 1 perimeter, and only 1 solid layer on the top and bottom. Reprinting with 3 perimeters led to a mount that did not fit together well. It is suggested that you print with only one perimeter or adjust your settings for a better fitting part. Alternatively, you can use sandpaper to open up the slots. Designed By: Tommy BertkenThe Printrbot Printrn