- All .stl files are designed to be printed without support (no area thinner than .4mm, no angle too steep) - All .stl files are oriented as they should be printed (change if you like) - I included a small support structure for the shade (head) in the .stl file. It sits just below the 11mm nub that sticks out of the side. If you tweak your retraction settings, you shouldn't get any stringing between any of the 20 slots, including when the tops of those slots are printed. - Because there are so many parts, I wasn't able to scroll down in the BOM section to add some parts a 2nd time. TODO - UPDATE BOM PART COUNTS