Translucent or transparent PLA or PETG filament. No supports required. Print 1 trunk and cap plus 4 leaves. Leaves X 4 Layer Height - 0.15mm Infill density - 25% Infill Pattern - Cubic Subdivision Adhesion - Brim Time - 1hr 25m Filament - 10g, 3.34m Trunk and Cap. Layer Height - 0.15mm Infill density - 25% Infill Pattern - Cubic Subdivision Adhesion - Brim Time - 5hr 16m Filament - 38g, 12.77m LED Tealight Height - 19mm Diameter - 37mm