Nema 14 Geared Extruder Rev 1.2

By Chri

179
32
Free
It's free to download
Main Image
Preview Image Preview Image

Comments

You need to be signed in before commenting.
emmausa
emmausa
over 1 year
I appreciate what you share in the post. Thanks to your post, I have gained a lot of new and useful knowledge. <a href="https://contextogame.co">contexto</a>
ataraxis
ataraxis
almost 9 years
Sers Chri! Hat sich dein Design denn bewährt? Falls nein, wo gibt's Probleme? Und könntest du die Quelldateien sharen? Ich würde gerne folgende Dinge anpassen: - NEMA 17 - 5mm Schlossschraube mit Endgewinde für das MK8 - 2.85mm Filament
qboney
qboney
about 9 years
Nice Job! I'm working on something similar for Nema14, but moving away from the hobbed bolt. Keep up the excellent work.
Chri
Chri
over 9 years
<p>Hy Apelpapa, as long as the Wallace has 50mm mounting holes and a topmount fit it should fit.</p><p>The M3 wormdrive will be needed for locking the small gear, it should not be longer than 4mm as there is not much space at the body</p>
Apelpapa
Apelpapa
over 9 years
<p>Will this work with RepRap Wallace? Thank you!</p>
Chri
Chri
over 10 years
The lightest useable may be the SM35HT27, its spec is 1.2kg at 110 gram weight, but don`t know hot to get them. i have a SY35ST28 with 1kg and 130 gram, but never had time to test it with it, maybe i will try it out some time.
Dinopuppy
Dinopuppy
over 10 years
Thanks for the reply! I'm looking for the lightest nema I can get away with.
Chri
Chri
over 10 years
sorry i don`t know the OZ values i only know the kg. As strong as possible, my Nema`s are wrong labelt (picture), they are SM35HT33 with 1.8 kg/cm holding torque and ~175gram.(rated 180 with cable) The gear has a ratio of 1:4,5 the effective force is about 8,1 kg/cm with them. As people also use nema 17 with 4.4kg/cm direct drive you should at least use a nema14 with 1kg/cm but the more the merrier. (1.2 1.4 or 1.8kg)
Dinopuppy
Dinopuppy
over 10 years
What oz nema would you recommend?
14 objects 41 Followers
Joined over 10 years ago Central-Europe

Old designs will be found at https://www.thingiverse.com/Chri/designs

YouMagine

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom