Hey, i am happy you are printing it :)
I printed it on my Ultimaker 2 in PLA.
I can imagine that the pins are really hard to print with ABS!. Also the small gear could be a problem.<br>Did you try to print multiple pins at once?
I printed 2x lockpins.stl and 2x bolts.stl at once, if they doesn't fit, it should be no problem to scale them down in your slicer.<br>Or you get the right 8 mm screws and use a nut to tighten it?? <br> Anyway. Keep me up to date, and if anything is really not printable, i could change some models so every one can print this in every material!
alexella
about 10 years
Hello Jonas,
I've (almost) printed your macro setup.
First of all, I totally agree with the idea of this setup. It's...easier to move the subject and not the camera.
Second...I wonder what printer do you have? :-)
The parts are really really really small and the accuracy almost exceeds the capabilities of my printer.But, I'll do my best to make it work. I might even replace with wood some pins that are a nightmare to print... at least for my ABS skills.
Other than this, a big thumbs up to your project !!!