NEW Version available! Masterspool V3.2. DAS FILAMENT Edition - (01.06.2023) - Further optimisation for the Bambu Lab AMS: spool edge with bevel, leads to better unwinding/rewinding behaviour in the AMS. - Outer diameter adjusted to 201 mm. Reduces the risk of material dragging in the AMS when the spool is full. Masterspool V3.1. DAS FILAMENT Edition - (05.02.2023) Upgrades: Outer diameter: 200 mm. Does fit in Bambu Lab AMS Added arrow on side A. Shows how to place the refill on the spool. The correct unwinding direction prevents accidental opening of the spool during printing. Masterspool DF Edition V3.0 Upgrades: 2x3 additional filament holders on the edge of the spool (left and right). Filament does not have to be kinked anymore, better stackability. Inspired by the solution of RichRaps Masterspool! Optimized thread form. A stop prevents over-tightening of the thread, so the cutouts for the cable ties are always alligned Snap in mechanism when closing the spool; prevents self opening of the spool when unrolling MasterSpool - DAS FILAMENT Edition optimized thread, less material can be printed with larger nozzles larger outer diameter (205 mm), prevents filament to jump from spool Main dimensions (width, inner diameter) are equal to the MasterSpool Standard scale window to estimate left filament bigger side cuts, easier to remove and add zip ties more (classic) side holes to fix filament ends stiffer side walls without cuts More details and pictures: --> https://www.dasfilament.de/detail/index/sArticle/362/sCategory/63