These attachment methods were tested with this print: * Adams Manufacturing 7000-75-3040 Mini Suction Cup Hook, 3/4-Inch: https://smile.amazon.com/gp/product/B000BQQZCA/ - (The trick to getting these in is turning while pushing the stem in) * Badge Magnets: https://smile.amazon.com/totalElement-Magnetic-Fastener-Adhesive-10-Pack/dp/B00EHK287M/ A STEP file breadboard.step is provided for remixing/modifying/experimenting! ### Printing Some items are optional, but these are necessary for a full print: * bumper-1.stl * bumper-2.stl * breadboard.stl If a center-only badge magnet was chosen, use this to hold it in: * center-retainer.stl And for more magnets (if you really need to hold something heavy): * retainer-block2.stl * retainer-block1.stl To block off any empty slots (so that the adhesive foam pad on most breadboards doesn't collect dust): * slot-cover-tabs.stl ### Notes * Adafruit's [halfsize breadboard was used as a base for this model's design](https://github.com/adafruit/Adafruit_CAD_Parts/tree/master/64%20Halfsize%20Breadboard)