This is a mount that fits a standard Taz gantry carriage for the e3D Titan Aero Standard or Mirrored. Depending on the version of Taz or Taz Clone you may not have bed leveling so I added the ability to add an 18mm inductive sensor with this mount. I have included an adapter for the 12mm inductive sensor. This mount is designed to place the nozzle directly in-line with the middle of the mount plate with the standard and mirrored e3D Titan Aero. The inductive mount is offset from the nozzle... (Standard) X-Axis -51.65mm, Y-Axis -11.1mm / (Mirror) X-Axis +51.65mm, Y-Axis -11.1mm. I do recommend a nema 17 motor with a body length <= 40mm. There are also holes in the mount to zip-tie cables in place for a neat and clean assembly. During assembly follow the Lulzbot Aerostruder assembly instruction (Assembly instruction link below). Most of the instructions will work for this design. Do note that the bottom screw for the heat sink fan will not able to be assembled. This missing will not cause an issue with function. I will be posting a video showing the full assembly specific to this model. (Anything stock assembly I will note to visit e3D's assembly for specifics) Lulzbot Aerostruder Assembly: https://ohai.lulzbot.com/project/taz-aerostruder-assembly/ e3D Titan Aero Wiki (Assembly/Drawings): https://wiki.e3d-online.com/wiki/Titan_Aero