- MicroBit - ZIP Tile LED Display - Plastic Mirror 212mm long x 40mm wide - Qty 3 - 10mm M3 X M3 Hex standoff threaded hole & screw - Qty 6 - 15mm M3 X M3 Hex standoff threaded hole - Qty 3 - 3mm x185mm rod - Qty 3 - M3 X 10mm countersink screw - Qty 3 - Masking tape. - 2mm drill bit. - Pliers. - M3 box spanner. - Scissors. - Saw to cut individual mirrors from larger sheet. - Carrier - Qty 1 - Ring - Qty 1 - Support Rings - Qty 3 - Eye Piece - Qty 1 The Supports Rings are the only items were multiple prints are required in this case 3 all other items only require 1. Print Details Resolution 0.15mm Infill 80% - Tri-Hexagon Filament SUNLU - Silky Shiny Gold All elements are printed flat on the bed without supports. Element print details - time, weight & filament length - Carrier - 1h 40m, 12g, 4.14m - Ring - 2h 47m, 19g, 6.2m - Support Rings - 1h 39m, 13g, 4.3m - Eyepiece - 1h 41, 13g, 4.47m