This is the Ivybridge Version of my simple delid tool. This Version is BETA,< There are two Ivybridge Heatspreader versions available, this one is based on the "round" spreader of the I3-3220. The -K CPUs have a different spreader with sharp corners, so it would be cool if someone with this CPU could test it and give a feedback. * print both parts, * put some sort of rubber or foam on the inner bottom of the base. * put the CPU into the CPU-holder with the long PCB part looking over the end of the tray. * then put it in your vice and close it carefully. For enough strengh print at least with 3 perimeters and 30% infill ! USE AT YOUR OWN RISK !!! * Only for CPUs who are glued and with thermal-paste, not for soldered CPU`s Donation: paypal.me/chriyoumagine