A GoPro camera mount for the small diameter Cannondale Synapse 25.4 mm seatpost.  Uses two 6/32 x 1/2 in screws and nuts to secure to the seatpost and a standard GoPro nut and thumb screw for the camera attachment point.Printed with the following settings to obtain a strong, but light (10g), mount:- ABS- 40% infill- 0.8 mm shell- 0.6 mm base- Brim- Support Touching build PlateI also tested this part with PLA and it worked file as well.  With PLA, I needed to use a Raft instead of Brim support for the best print.