Technical
Advised printing method for PLA:
Base.stl: Wall thickness 1.2mm & infill 50% & diagonal on printbed
Bottom.stl: Wall thickness 1.2mm & infill 50% & diagonal on printbed
Top.stl: Wall thickness 1.2mm & infill 50% & diagonal on printbed
Cap.stl: Wall thickness 1.2mm & infill 100%
Stand.stl: 2x & Wall thickness 1.2mm & infill 100%
When printed: attach the stands to the top and bottom using 16 x 3.5 mm screws.