Technical
Springs
Main Spring: length:73,5mm; outer diameter:14mm; wire:1,5mm
Trigger Spring: length:30mm; outer diameter:10mm; wire:0,8mm
Catch Spring. length:16mm; outer diameter:8mm; wire:0,63mm
Pipe
lengh 95mm; outer diameter 26mm; inner diameter 19,5mm
Screws
Piston Screw: length:16mm; diameter: 3mm
Trigger Screw: length:8mm; diameter: 2,5mm
Back Screw: length:6mm; diameter: 2,5mm
2x Rubber ring:
diameter: 25mm
sealing ring:
outer diameter 20mm; inner diameter 10mm
Some oil for the sealing ring
All non- non- printable parts in one pack:
https://www.ebay.de/itm/114712042527
Here you can find the youtube video on how to assemble the gun:
https://www.youtube.com/watch?v=jIdk0Nr9jQ0&feature=emb_imp_woyt
Printer: Anycubic Mega X
Filament: PLA
Barrel, Back, Slice, Handle:
Resolutuin 1,5 - 3 mm
Iinfill 50%
Support overhang angle 60°
Catch, Front, Piston, Piston Head 1/2, Trigger, Trigger Support:
Resolution 1,5 - 3mm
Infill 100%
Support overhang angle 60°
Printing time:
With my Anycubic Mega X the printing time is close to 21 hours
If you place the 3D modells correctly, there istn`t that much support to remove. I recommend using a cutter nive and a pliers.