Technical
Modelled in Solvespace.
Sliced with Cura 3.6:
Walls: 3
Infill: 20%
Layer height: 0.2mm
Support: None
Heat file with hot air and press into hole.
I used files from Biltema:
https://www.biltema.se/verktyg/handverktyg/filar/nalfilar-10-st-2000016868
Printed in Fillamentum PLA Extrafill Noble Blue:
https://fillamentum.com/collections/pla-extrafill/products/pla-extrafill-nobble-blue