Filament Spool Holder for 3D Printer
By Mark_Rehorst
Free
It's free to download
Technical
I used PLA, but ABS is OK too. You'll also need three 5/16-18 or 8mm bolts and nuts, 12 washers, and 6 x F608zz bearings.
The print is 305mm talll, so you're going to need a big printer.
I printed in 0.25 mm layers with 15% infill. The rollers need support material on the bottom, so turn it on but limit it to bed plate only.
40 objects
85 Followers
Joined about 10 years ago
Wisconsin, USA
Former electrical engineer, I became a dentist in 2011. I designed and built my printer, Son of MegaMax, using surplus machine parts at the Milwaukee Makerspace. My newest printer design, Ultra MegaMax Dominator, is a coreXY machine with a 300...
Free