YouMagine

Information Comments Technical Files

Comments

You need to be signed in before commenting.

DrFaust

over 8 years

Not suitable for the new Um²case, before printing check the millings in your case.

shawny2005

almost 9 years

<p>so far this has seemed to fix some of the issues out of box that I was getting from the ultimaker 2.  thanks!</p>

shawny2005

almost 9 years

<p>printing now!</p>

Geeks

about 10 years

At the moment, I do not think so. But if it also become problematic with what we had at the start ... I would stick there of course. We will cut, saying that as long as I do not have the utility, I am what is done. If my Sen. need arises, I would share :)

ProfePaco

about 10 years

Hi: Thanks for the design. I am wondering if you will upgrade it when the two extruders kit would be available.

Geeks

over 10 years

You have several options available. 1 / Put the fans running from the second layer. 2 / Reduce speed. I have put 20mm / s 3 / Use a PLA does not flow and holding in 200 ° C. It took me several test. In case it does not fonctionnerais well, you can replace it with a tube.

sergioka

over 10 years

Hey Geeks, how did you print the spool? The problem is that the top right side doesn't get much under the airflow of the fan on the right side. That's the reason why my spool looks not so nice as yours. Do you know how I can prevent such things in the future? Thanks in advance

Geeks

over 10 years

Hehe! Happy for you that it has worked. :)

Ndimensional

over 10 years

Yes, thank you, worked well for me - thank you!

Geeks

over 10 years

Hello, I have printed piece with a dense support proposed in Cura. This poses no particular concern. As I see your request, I will allow me to provide my settings in a few images. Look ...

Ndimensional

over 10 years

Hi, I am wondering which settings you used to print it. The spool is ok, but the holder has quite some overhang between the bottom plate and the rest above. And from the photo it does not look like it was printed with support structure (quite dense) and this was then removed.