YouMagine

Information Comments Technical Files

Comments

You need to be signed in before commenting.

bibibobobubu

over 7 years

Here is the bracket you seek : https://www.youmagine.com/designs/u2rs-alternative-feeder-mount#activity

sipango

about 8 years

i am sorry perhaps i didnt define the part i am after perhaps i should have sayed BRACKET ATTACHİNG THE FEEDER TO THE BACK PLATE because i coudnt find anything in the archive what will the proper name for it ?can you help me,thank you

sipango

about 8 years

İ could not finde the printıng file to the winkle part wich attaches the feeder to the back plate

UltiArjan

about 9 years

@Blizz, yep, still compatible.

Blizz

about 9 years

Is the Body v2 still compatible with the rest of the pieces? Or do we have to reprint the whole shebang?

Blizz

about 9 years

Is the Body v2 sill compatible with the rest of the pieces? Or do we need to reprint the whole shebang?

UltiArjan

over 9 years

and if you really want to build from scratch; for most parts you can finds the UM specs here; https://github.com/Ultimaker/Ultimaker2 The spring is a D2000 according to the github files, but is has been changed on the UM2 some months ago. According to info on the forum it's now the D2110 from Alcomex (or as DAID say's it has the same specs as this one) http://alcomex.nl/wp-content/uploads/2014/07/Drukveren-20from-20Catalogus-20NL-2005.pdf

UltiArjan

over 9 years

This fine site is not letting me update the BOM so here it is.for bolts, have a look at the picture with the color rings;all M3 + M3 locknuts:green; original motor bolts from your UM2pink; M3 x 30 (longer is no problem) yellow; m3 x 25mm, longer is no problem (small head, needs to be able to sink into the bearing arm. The bolt holding the spring is a m3 x 50mm (minimal) with a hex shaped head. If you can't find one with a hex shape make one by taking another  bolt and put a hex nut on it against the head, fix with loctite. Use a locknut to hold the spring (inside the printed knob), to avoid unwanted change of pressure. the Blue bolts are M4 x 20 (or longer) I used butterfly nuts, but there's no real need for it. The spring and bearing are from the original UM2 feeder.

CptanPanic

over 9 years

Would it be possible for you to document all the bolts, nuts, and bearing needed to build this from scratch?

CaseyScalf

over 9 years

An excellent alternative. I appreciate the tip.

UltiArjan

over 9 years

there's a please print this for me section in the Ultimaker forum, you may find someone there close to you

CaseyScalf

over 9 years

Unfortunately it will cost $300+ USD so that is not an option.  Thanks though!

CaseyScalf

over 9 years

3D hubs, thanks for the tip that's a good call

UltiArjan

over 9 years

Im a bit busy atm. If you need a feeder fast i would advise to use one of the 3d hubs...

CaseyScalf

over 9 years

Hello, Would you be willing to print one and ship it to me? Mine is broken and I don't have any other way to make this. I would of course be willing to pay Thanks