VS4-10 Cantilever Rear Suspension for Hard Body Dropped Beds (Phoenix & Origin)

By HookerDesigns

90% goes to the Creator (excluding payment processing fees)

$8.50

Add to Cart

❯ VIDEOS 1

❯ IMAGES 8

❯ DOCS 0

VS4-10 Cantilever Rear Suspension for Hard Body Dropped Beds (Phoenix & Origin)

By HookerDesigns

90% goes to the Creator (excluding payment processing fees)

$8.50

Add to Cart

Information

VS4-10 Cantilever Rear Suspension for Hard Body Dropped Beds (Phoenix & Origin)

By HookerDesigns

at 2024-12-07

Cantilever rear suspension compatible with all models of the Vanquish VS4-10 including Phoenix & Origin; both portal and straight axle variants.

Video in action:
https://www.instagram.com/p/C7vI7G0RY_V/

THIS MODEL IS LICENSED TO YOU FOR PERSONAL USE ONLY. YOU ARE NOT PERMITTED TO SELL PRINTS BASED ON THIS MODEL.

Technical

VS410_Rockers_19mm are short travel. THESE ARE DEFAULT.
VS410_Rockers_21mm are medium travel
VS410_Rockers_23mm are long travel. These provide the most flex.
*I suggest starting with the 19mm rockers and going from there.

Requires the following hardware for assembly:

(6) M3x10mm Flathead - For Cantilever Mount to VS410 Frame
(4) M3x16mm -Shock & Link Mounting Hardware
(2) M3x25mm - Main Pivot Bolt for Rocker
(4) 3x8x3 Bearing (MR83ZZ on Amazon) - Main Rocker Pivot Bearings
(2) M3 Washers - To act as a spacer between the rocker and mount

For shocks I recommended the Gmade 75mm (GM22307). Alternate 65-85mm shocks MAY work but stock geometry is based around the Gmade.

For links; suggest using M4x20 grub screw on (2) Traxxas Revo Rod Ends, One short and one long per side:
Short Rod Ends (TRA5347)
Long Rod Ends (TRA5525)

Using a combination of short/longer rod ends will adjust your ride height accordingly; I use one long and one short rod end per side myself. For extreme lift longer custom links may be required.