90% goes to the Creator
(excluding payment processing fees)
$7.50
90% goes to the Creator
(excluding payment processing fees)
$7.50
Information
RC 1/10 Blacklist #3 - Ronnie
Bodywork based on the Blacklist #3 - Ronnie from the game Nfs Most Wanted.
36 pieces
Functional headlights, taillights and blinker: LEDs 5mm/3mm
**Assembled Size:**
Length: 528 mm
Width: 217 mm
Height: 139 mm
**Wheelbase: 336 mm**
You need:
-59- M3 or 1/8 in. screw maximum length 12 mm
-4- Round magnets 12 x 3mm / 0.47 x 0.12 inches
**The use of adhesive can be helpful with small parts.**
This bodywork is compatible with Free! Chassis 1/10 Adaptable - DKS-Basic by dukedoks
Many thanks to @dukedoks for letting me use his Chassis.
**Use authorized by dukedoks**
The design only includes the bodywork of the RC 1/10 Blacklist #3 - Ronnie and tires.
**Chassis not included**
Check the Assembly Manual if you have any questions. Here
36 pieces
Functional headlights, taillights and blinker: LEDs 5mm/3mm
**Assembled Size:**
Length: 528 mm
Width: 217 mm
Height: 139 mm
**Wheelbase: 336 mm**
You need:
-59- M3 or 1/8 in. screw maximum length 12 mm
-4- Round magnets 12 x 3mm / 0.47 x 0.12 inches
**The use of adhesive can be helpful with small parts.**
This bodywork is compatible with Free! Chassis 1/10 Adaptable - DKS-Basic by dukedoks
Many thanks to @dukedoks for letting me use his Chassis.
**Use authorized by dukedoks**
The design only includes the bodywork of the RC 1/10 Blacklist #3 - Ronnie and tires.
**Chassis not included**
Check the Assembly Manual if you have any questions. Here
Technical
Minimum print area tested, 220 x 220 x 250 mm / 8,6" x 8,6" x 10,6" inches
Resolution: 0.2mm
Perimeters: 3
Bottom layers: 3
Top layers: 4
Infill: 10%
Supports: Organic or Tree
Adhesion: Use raft or additional supports if you have adhesion issues.
Using low speeds reduces printing defects, it is recommended to use less than 50% of the total speed of your machine.
If you plan to do post-processing of the paint, use 4 or more perimeters
Flexible Tires:
**TPU**
Low speed: approximately 20mm/s
Perimeters: 3
Lower layers: 3
Upper layers: 5
Filling: 0%
Adhesion: No
Resolution: 0.2mm
Perimeters: 3
Bottom layers: 3
Top layers: 4
Infill: 10%
Supports: Organic or Tree
Adhesion: Use raft or additional supports if you have adhesion issues.
Using low speeds reduces printing defects, it is recommended to use less than 50% of the total speed of your machine.
If you plan to do post-processing of the paint, use 4 or more perimeters
Flexible Tires:
**TPU**
Low speed: approximately 20mm/s
Perimeters: 3
Lower layers: 3
Upper layers: 5
Filling: 0%
Adhesion: No
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
Related objects
57 objects
29 Downloads
2 Followers
Joined 3 months ago
Andorra
Life And, 3D Printing Life
YouMagine
a MyMiniFactory company
© 2024 YouMagine. All rights reserved. 2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free