90% goes to the Creator
(excluding payment processing fees)
$2.75
Technical
To complete this build you will need:
- 1 x M2 screw 20mm to 35mm long (you can find it here: https://es.aliexpress.com/item/32442183034.html)
- 1 x M2 nut (you can find it here: https://es.aliexpress.com/item/1005003994209489.html)
- 1 x paper clip
I like to use paper clips since they are common, cheap and have 1mm diameter. You will need to cut the straight part to make a 22mm long rod that we will use to create the handle.
There are 4 holes in the bottom part that you can use to attach it to a bench using M1 screws. I used 2mm screws (just for the scale look) and double sided tape to put it on mine.
Free